-40%
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill
4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill

4.5'' dry core bit with sds plus shank adapter and pilot bit for hammer drill

$ 67.05

Availability: 275 in stock

Description

4.5" LASER WELDED TURBO SEGMENTED DRY CORE BIT WITH SDS PLUS ADAPTER AND CENTER GUIDE
. THIS CORE BIT IS MANUFACTURED FOR DRILLING MASONRY, CURED & REINFORCED CONCRETE WITH MEDIUM  TO HARD AGGREGATES & MEDIUM STEEL REINFORCING.
THE
12MM
TURBO SEGMENTS HAVE THE HIGHEST DIAMOND PARTICLES PER SEGMENT IN THE INDUSTRY. THE NOTCH GROOVE IN SEGMENTS ARE  DESIGNED IN  AIDING WITH STEEL AGGREGATES IN CONCRETE...
Unique item description:
Industrial barrel is manufactured with 1/8’’ a part grooves for quicker extraction from material.
Laser welded segments overlap barrel for longer life.
Industrial grooved segment bodies are laser welded on both sides, inner and outer to barrel.
-V- Style segments are manufactured for entering material quickly and minimizing kick back or bounce.
If you need a custom package for your industry, please contact us and we can create one.
Fits Sds Plus hammer drills
For use with materials that have rebar and wire mesh
OUTER DIAMETER: 4.5''
SEGMENT HEIGHT: 3/8"
SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE
MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS WITH STEEL REINFORCING
CORE TRAVEL: 10”
THREAD SIZE:
5/8"
BOND TO CORE: INNER/OUTER DOUBLE LASER WELD
INSTRUCTIONS FOR CENTER GUIDE USE:
(1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. TAP IT IN. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE
(2) THREAD ON TO DRILL
(3) SCREW DRY CORE BIT OVER ADAPTER
(4) PENETRATE MATERIAL ABOUT 3/4" TO 1 ½” (PASS THE LASER WELDED SEGMENTS)
(5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREW DRIVER INSIDE ADAPTER HOLE)
(6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE,
DO NOT CORE WITH CENTER GUIDE IN BARREL.