4 Outlet Hydroponics Indoor Grow Light Relay Controller Box HID Grow Lamp 4000W

Description

Features : • Controls Up To Four  1000W High Intensity Discharge (Hid) Ballasts, Including Both Metal Halide (Mh) And High Pressure Sodium (Hps) Lighting Systems. • Integrated 120V Trigger Cable Facilitates Any Timed Lighting Sequence When Connected To a Standard 24-Hour Timing Device • Green Led Indicator Illuminates When Light Controller. Is Activated And On Via The Trigger Cable Function.  • Composed Of High-Quality Components For Reliable, Long-Term Performance. • Wall-Mountable. Specifications: Main Power Voltage: 120V Or 240V Receptacle Type: 4 Universal Outlets Max Wattage: 4000W Total/ 1000 Watts Per Outlet Rated Amperage: 30Amps Trigger Cable Voltage: 120V Operating Temperature Range: 32-110°F Operating Humidity Range: 0-99% Rh Non condensing Minimum Relay Operati
Features :
• Controls up to Four  1000w High Intensity Discharge (Hid) Ballasts, Including Both Metal Halide (Mh) and High Pressure Sodium (Hps) Lighting Systems.
• Integrated 120v Trigger Cable Facilitates Any Timed Lighting Sequence When Connected to a Standard 24-Hour Timing Device
• Green Led Indicator Illuminates When Light Controller. Is Activated and on via the Trigger Cable Function.
• Composed of High-quality Components for Reliable, Long-term Performance.
• Wall-mountable.
Specifications:
Main Power Voltage: 120v or 240v
Receptacle Type: 4 Universal Outlets
Max Wattage: 4000w Total/ 1000 Watts per Outlet
Rated Amperage: 30amps
Trigger Cable Voltage: 120v
Operating Temperature Range: 32-110°F
Operating Humidity Range: 0-99% Rh Non Condensing
Minimum Relay Operations: 100,000 at Full Load
Size:20*8*24cm/7.87*3.15*9.45inch
Weight:2.4kg
Package Includes:
1 X Light Control Box
Important Precautions :
• Consult a Licensed Electrician Prior to Installation or Have the Unit Professionally Installed.
• Do Not Install the Light Controller If You Are Unfamiliar with Electrical Wiring and Circuits or If You Do Not Fully Understand the Instructions.
• All Local and National Electrical Codes Must Be Followed.
• Use the Light Controller Only for Its Intended Purpose.
• Do Not Exceed the Maximum Ratings of This Unit.
• Verify All Devices to Be Controlled by the Light Controller Are of the Correct Voltage.
• Unit Is for Indoor Use Only. Exercise Extreme Caution in Moist or Humid Environments.
• Improper Installation or Use of This Controller Could Result in Severe Damage and/or Personal Injury.
Installation Notice：
Do Not Connect Ballasts to the Light Controller Until After the Main Power Has Been Properly Installed.
Verify Trigger Cable Is Disconnected from the External Timer or Controller.
Connect Ballast Power Cables to the Receptacles on the Light Controller.
Connect the Trigger Cable to the External Timer or Controller.
On Jun 21, 2022 at 03:37:42 PDT, seller added the following information: