8 Channel Network Relay Accessory Control Module Remote Useful Durable

Description

Product Description
8 Channel Network Relay Accessory Control Module Remote Useful Durable
Product Description :
1. Strong anti-interference ability, can be connected to external high-current AC contactor and relay, will not crash under strong electromagnetic interference.
2. The product is resistant to high temperatures and can work in the environment of -40 to 85 ° C.
3. Industrial grade products. Support automatic acquisition of IP.
4. The true 100M speed enables reliable communication with 0 delay
order
s.
5. Support 10 TCP client connections under the TCP server.
6. Through the provided configuration software, you can configure five working modes: TCP server, TCP client, UDP server, UDP client, DNS domain name.
7. 8-way relay, 8-channel digital input with full-open and full-off input. With power-down save function (save relay status).
8. With an RS485 port, it supports Ethernet to RS485 transparent transmission.
Product Specification:
Item Type:Network Relay
Power Supply:DC7~24V(DC socket or wiring terminal can be selected to input power.)
DC Connector Size:5.5 x 2.1mm / 0.22 x 0.08in (Outer Diameter - Inner Diameter)
Working Temperature Range:-40~85℃
Users Manual:
8 in dependent relay outputs
The output does not have voltage. The single relay has a DC rating of 10A, an AC rated current of 10A, a maximum AC rating of 250V, and a maximum DC rating of 30V.
10 channels of in dependent input
IN9 means full open, after IN9 has digital input, all relays are connected.
IN10 means full off. When IN10 has output, all relays are off.
The 8-input user of IN1-IN8 can be configured into three different working modes through the configuration parameter tool, and is selected under the “Input Mode” of the configuration tool.
In the "normal input" mode, the ordinary input signal is acquired. To obtain the input status, a
order
to read the input status is sent to the device.
"Trigger Relay" mode, after this mode has input, the corresponding relay state is reversed, and the IN1-IN8 control corresponds to the 1-8 relay.
Active Upload mode, which actively sends an input status to the network connected to the device when there is a change in the input.
The device has an RS485 interface. It can be controlled by RS485 equipment from other manufacturers. Can realize the transparent transmission of network data to RS485 data, the baud rate 300-115200 can be configured. When using parity, the data bit must be configured to 9 bits, and the serial port parameters are configured through the configuration tool.
The device has a power-down save function that saves the status of the relay and can be configured through the configuration tool.
Reset the configuration. The label RESET position is the factory reset button.
Working mode introduction
The working mode is configured with the provided configuration software.
1, TCP server
In this mode, the device can only be connected through the TCP client and supports the connection of 10 TCP clients.
2, TCP client
In this mode, the device actively connects to the TCP server (remote IP and remote port number are parameters for device connection). Only one server can be connected.
3, UDP server
In this mode, any UDP communication is supported.
4, UDP client
In this mode, only UDP communication is supported for remote IP and remote port number (configuration software settings).
5, DNS domain name
In this mode, the device connects to the TCP server (the port is the remote port) that binds the domain name with a TCP client.
order interpretation
The above
order
s are sent and received in characters. There is no carriage return after the order, no spaces. To be hexadecimal, you need to check the ASCII code table to convert itself.
Get device name
Send: name
Return: name="HHC-N8I8OP"
The HHC-N8I8OP is the device name and can be configured using the configuration tool.
Control the first relay
Send: on1
Return: on1
Turn off the first relay
Send: off1
Return: off1
The order format is on and off followed by the relay channel, and the 2-8 control is the same as above.
Control all relays
Send: all00000011
Return: relay00000011
All is to control all relay orders, the latter 8 channels control, 1 means pull-in, 0 means to loosen the above order to indicate that the first road is connected with the second road, and the third road is released. After this instruction is executed, it returns to the state of the relay. The status information of the relay is the same as the information returned by the read order.
Delay control
For example, if you want the relay to pick up and then release it for 2 seconds, you can send the following order.
Send: on1:02
Return: on1
The above order indicates that the relay is released after 2 seconds of pull-in, on1: indicates the relay to be controlled, followed by the delay time, maximum 99 seconds, for example, on2:12 means that the second relay is released after 12 seconds of pull-in. The other 2-8 controls are the same as above.
Read relay status
Send: read
Return: relay00000001 (represents the status of the 8-way relay, 1 means the relay is closed, 0 means that if the device is released, the above indicates that the first relay is closed, and the 2-8 relay is released)
Reading switch
Send: input
Return: input00000001
Input followed by 00000001, 1 means there is a digital input, 0 means no switching input, indicating the input state of the 8-way switch, the above order indicates that the first circuit has a digital input, and the second one has no digital input. The 9th and 10th switch is used to control the full open and close of the relay and cannot be read. The input is configured in the “active upload” mode, and the above return information is automatically sent when the switch input changes.
High speed communication
High-speed communication, the computer does not have to wait for the device to send data, and the device can handle it. Working under the TCP server, the device supports 10 TCP clients to continuously send data. A network chip that is not an serial port interface, such as a chip such as ENC28J60 or W5500, is comparable to a true 100M network port.
Package List:
1 *Network Relay
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Payment
We accept payment via Paypal only.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed Paypal addresses.
Please comfirm that your paypal address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.