Aftermarket AI Hydra 26/32 Diffuser

Description

Similar to ecotech radion light diffusers, this after market item offers you the ability to reduce hot spots, blend lighting, and reduce shimmer.
When adding these units to your light you will find it brings a warm blended output similar to that of T5 with a bit of shimmer. Comes with all items necessary to remove OEM screws and install diffusers.
Installation is very easy and covered in the below steps.
1. Unplug and remove light.
2. Find included drill bit and remove OEM screws from bottom of LEDs.
3. Remove OEM plastic cover from bottom of LEDs.
4. Remove clear OEM circular LED lens from the LED pucks.
5. Place OEM plastic cover back on.
6. Stack the following components on top of OEM plastic cover:
Acrylic spacer
Diffusion film (matte side facing LEDS, shiny side out)
Acrylic spacer
7. Using the included screws screw all of these components until snug.
Once you diffuser is installed you will have a slight reduction in par. You best option is to remeasure your par using a par meter. If unavailable, you should increase light by 15-20% to account for your diffuser.