Dry laser welded core bit set: 1.5",2.5",3.5", 4.5" with Sds plus shank adapter

Description

Industrial quality: retail package price: 5.00
Order includes SDS Plus shank adapter with center guide (pilot bit)
DRY CORE BIT SET 1.5", 2.5", 3.5" and 4.5" (4 TOTAL BITS) PROFESSIONAL
LASER WELDED TURBO SEGMENTED DRY CORE BIT
. THIS CORE BIT IS MANUFACTURED FOR DRILLING MASONRY, CURED & REINFORCED CONCRETE WITH MEDIUM  TO HARD AGGREGATES & MEDIUM STEEL REINFORCING.
THE
12MM
TURBO SEGMENTS HAVE THE HIGHEST DIAMOND PARTICLES PER SEGMENT IN THE INDUSTRY. THE NOTCH GROOVE IN SEGMENTS ARE  DESIGNED IN  AIDING WITH STEEL AGGREGATES IN CONCRETE...
Unique item description:
Industrial barrel is manufactured with 1/8’’ a part grooves for quicker extraction from material.
Laser welded segments overlap barrel for longer life.
Industrial grooved segment bodies are laser welded on both sides, inner and outer to barrel.
-V- Style segments are manufactured for entering material quickly and minimizing kick back or bounce.
If you need a custom package for your industry, please contact us and we can create one.
OUTER DIAMETER: 1.5", 2.5", 3.5" and 4.5"
SEGMENT HEIGHT: 3/8"
SEGMENT THICKNESS:
1/8”
SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE
MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS WITH STEEL REINFORCING
CORE TRAVEL: 10”
THREAD SIZE:
5/8" - 11
BOND TO CORE: INNER/OUTER DOUBLE LASER WELD
Core Bit Adapter 5/8"-11 Threaded Male to SDS Plus Male With Center Guide
Takes a standard 10'' length dry core bit with  5/8''-11 thread and converts for use on SDS Max Rotary Hammer drills
Guide is 12.5'' long
Easily start a hole with no push back or bouncing to protect core bit segments and drill motor
Quality adapter is made from heavy steel
Easily convert 5/8”-11 female arbor to SDS Plus male
Center guide manufactured with zinc and cobalt
INSTRUCTIONS FOR CENTER GUIDE USE:
(1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. TAP IT IN. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE
(2) THREAD ON TO DRILL
(3) SCREW DRY CORE BIT OVER ADAPTER
(4) PENETRATE MATERIAL ABOUT 3/4" TO 1 ½” (PASS THE LASER WELDED SEGMENTS)
(5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREW DRIVER INSIDE ADAPTER HOLE)
(6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE,
DO NOT CORE WITH CENTER GUIDE IN BARREL.