Kensol K25T, Air-Operated Hot Foil Stamping Press, 1-1/2 Ton, 115VAC, 1000W

Description

Kensol K25T, Air-Operated Hot Foil Stamping Press, 1-1/2 Ton, 115VAC, 1000W
This is a used Kensol Air-Operated Hot Foil Stamping Press, Model K-25-T. This model has a pressure range of up to 1 1/2 tons @ 80PSI. It has a 6 x 8 inch impression area with a 1,000-watt heating system allowing it to reach temperatures of up to 550 degrees. The Kensol 25T can stamp items up to 6 inches high and automatically compensates for thickness variations in items being stamped. For setup, a hand lever was installed to bring the head up or down. This unit is in good condition with a few blemishes from long term storage.
Impression Area: 6 x 8 inches
Heating System: 1000 Watts
Head stroke: 3 inches
Depth of Throat: 6 1/2"
Maximum Opening (with head in up position): 9 inches
Pressure Range: up to 1 1/2 tons @ 80 PSI
Dwell Timer: 0-5 seconds
Electrical Requirement: 115V AC
Compressed Air Requirements: 10 CFM when operated at 100 PSI
OSHA Approved Two Switch Safety Mechanism to prevent injury during operation
Click
HERE
to see test video.
Specifications:
MFG:       Kensol
Model:     K-25-T
Serial:     T-1183-D
Volts:       115
Weight:   1.0000 Lbs
All dims inches unless otherwise noted
Inventory #: 8466
Location: PRC2C
WE SHIP INTERNATIONALLY
contrary to the Ebay
statement
that says we only ship to united states.
Contact us for shipping quotes
International purchases: A documentation processing fee will be added to total purchase for items under 0.
Our company return policy is that our description is guaranteed and we will accept returns in the event an item is mis-described.
When communicating with us please use your own email address.  We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system.
Send emails to heritageequipment AT gmail . com
The new ebay buyer protection program has inspired us to offer all of our items “as-is”.
This does not mean that you are buying a machine with deficiencies, known or unknown.
What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine.
In addition to this written description you will have the opportunity to view high quality photos of the item.
With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Feel assured that we will make a diligent effort to give you an accurate description of the equipment.
As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine.
Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment.
The very few times we have had to deal with these issues we have been very helpful in resolving the problem.