New Milwaukee 6" 1-1/2" sds-max spline thick wall core bit 48-20-5165 48-20-5125

Description

Milwaukee SDS-MAX/Spline Thick Wall Carbide Tipped Core Bit 1-1/2 in.
Made in Japan
Model Number: 48-20-5125
Milwaukee SDS-MAX/Spline Thick Wall Carbide Tipped Core Bit 6 in.
Made in Japan
Model Number: 48-20-5165
Milwaukee Thick Core Bit Extension 7-1/2 in.
Model Number: 48-95-6085 USED  VERY GOOD
This adapter extends drilling by 7-1/2 inch with small diameter Thick Wall Core Bits. Use with Spline Drive Core Bit Shanks 48-03-3564 (12 inch long) and 48-03-3565 (18 inch long) and fit Core Bits from 1-1/2 inch to 6 inch.
Features:
7-1/2 inch extension
For use with 1-1/2 in. to 6 in. diameter Thick Wall Core Bits
Milwaukees Carbide Tipped Core Bits are ideal for drilling large holes where the depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-1/16 inches. Thick Wall Core Bits are used for cured/seasoned concrete or use with larger hammers. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the Core Bit. Use of Center Pin and Guide Plate is recommended for positioning and starting a 1-1/4 inch hole and larger. Use of Center Pin and Guide Plate is NOT recommended for positioning and starting a 1-1/8 inch hole or smaller. Milwaukee Carbide Tipped Core Bits are available from 1 inch to 6 inch diameters.
Features:
Thick Wall Design
1-1/2 in. Diameter
Usable Cutting Depth 4-1/16 in.
Use with 12 in. or 18 in. SPLINE Adapter Shanks (48-03-3564, 48-03-3565 ) and 12 in. or 18 in. SDS-MAX Adapter Shanks (48-03-3572, 48-03-3573)
Use With 7-1/2 in. Extension 48-95-6085
Use With Guide Plate 48-20-5168 and Centering Pin 48-20-5199
Includes Core Body with Guide Plate & Centering Pin
Specifications:
Type Masonry Drill Bits
Diameter 1-1/2 in.
Style Thick Wall for SDS-MAX or Spline
Cutting Depth 4-1/16 in.
Includes:
(1) Core Bit Body
(1) Guide Plate & Centering Pin
Milwaukee SDS-MAX/Spline Thick Wall Carbide Tipped Core Bit 6 in.
Model Number: 48-20-5165
Features:
Thick Wall Design
6 in. Diameter
Usable Cutting Depth 4-1/16 in.
Use with 12 in. or 18 in. SPLINE Adapter Shanks (48-03-3564, 48-03-3565 ) and 12 in. or 18 in. SDS-MAX Adapter Shanks (48-03-3572, 48-03-3573)
Use With 7-1/2 in. Extension 48-95-6085
Use With Guide Plate 48-20-5176 and Centering Pin 48-20-5199
Includes Core Body with Guide Plate & Centering Pin
Specifications:
Type Masonry Drill Bits
Diameter 6 in.
Style Thick Wall for SDS-MAX or Spline
Cutting Depth 4-1/16 in.
Includes:
(1) Core Bit Body
(1) Guide Plate & Centering Pin
ships to all lower states and to regular residential/business's addresses, no PO box
PLEASE ASK  QUESTIONS  BEFORE
YOU BID!!!!