Omron MY2N-GS (MY2N-J) DC24 Miniature Power Relay

Description

Omron MY2N-GS (
MY2N-J) DC24 Miniature Power Relay
Other models available.
Reduces wiring work by 60% when combined with the PYF-PU Push-In Plus Socket (according to actual OMRON measurements).
Now lead-free to protect the environment.
VDE certification (Germany).
Different colors of coil tape for AC and DC models to more easily distinguish them.
MY(S) models with latching levers added for easier circuit checking.
Operating Coils (Standard Models)
Item
Rated current
(mA)
Coil
resist-
ance
(Ω)
Coil inductance (H)
Must-
operate
voltage
(V)
Must-
release
voltage
(V)
Maximum
voltage
(V)
Power
con-
sumption
(VA, W)
Rated
voltage (V)
50 Hz
60 Hz
Armature
OFF
Armature
ON
AC
12
106.5
91
46
0.17
0.33
80% max.
*1
30% min.
*2
110% of
rated
voltage
Approx. 0.9
to 1.3
(at 60 Hz)
24
53.8
46
180
0.69
1.3
100/110
11.7/12.9
10/11
3,750
14.54
24.6
110/120
9.9/10.8
8.4/9.2
4,430
19.2
32.1
200/220
6.2/6.8
5.3/5.8
12,950
54.75
94.07
220/240
4.8/5.3
4.2/4.6
18,790
83.5
136.4
DC
12
72.7
165
0.73
1.37
10% min.
*2
Approx. 0.9
24
36.3
662
3.2
5.72
48
17.6
2,725
10.6
21.0
100/110
8.7/9.6
11,440
45.6
86.2
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%
for the AC rated current and ±15% for the DC coil resistance.
2. The AC coil resistance and inductance values are reference values only (at 60 Hz).
3. Operating characteristics were measured at a coil temperature of 23°C.
4. The maximum voltage capacity was measured at an ambient temperature of 23°C.
*1. There is variation between products, but actual values are 80% max.
To ensure operation, apply at least 80% of the rated value (at a coil temperature of +23° C).
*2. There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To
ensure release, use a value that is lower than the specified value.
Contact Ratings
Load
Resistive load
Inductive load (cos φ = 0.4, L/R = 7 ms)
Rated load
5 A at 220 VAC
5 A at 24 VDC
2 A at 220 VAC
2 A at 24 VDC
Rated carry current
5 A
Maximum contact voltage
250 VAC, 125 VDC
Maximum contact current
5 A
Contact configuration
DPDT
Contact structure
Single
Contact materials
Ag
Type
Standard models
Model with built-in operation indicator,
diode, or CR circuit
Ambient operating temperature *1
-55 to 70°C
-55 to 60°C *2
Ambient operating humidity
5% to 85%
*1. With no icing or condensation.
*2. This limitation is due to the diode junction temperature and elements used.
Characteristics
Type
Standard
models
Models
with
built-in
operation
indicators
Models
with
built-in
CR
circuits
Models
with
built-in
diodes
Model with
built-in
operation
indicator
and diode
Model with
built-in
operation
indicator and
CR circuit
Contact resistance *1
50 mΩ max.
Operation time *2
20 ms max.
Release time *2
20 ms max.
Maximum
operating
frequency
Mechanical
18,000 operations/h
Rated load
1,800 operations/h
Insulation resistance *3
100 MΩ min.
Dielectric
strength
Between coil and
contacts
2,000 VAC at 50/60 Hz for 1 min.
Between contacts of
different polarity
Between contacts of
the same polarity
1,000 VAC at 50/60 Hz for 1 min.
Vibration
resistance
Destruction
10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Malfunction
10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shock
resistance
Destruction
1,000 m/s
2
Malfunction
200 m/s
2
Endurance
Mechanical
AC: 50,000,000 operations min.
DC: 100,000,000 operations min.
(switching frequency: 18,000 operations/h)
Electrical *4
500,000 operations min. (rated load, switching frequency: 1,800 operations/h)
Number of poles
2 poles
Failure rate P value (reference value) *5
1 mA at 5 VDC
Weight
Approx. 35 g
Note: These are initial values.
*1. Measurement conditions: 1 A at 5 VDC using the voltage drop method.
*2. Measurement conditions: With rated operating power applied.
Ambient temperature condition: 23° C
*3. Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.
*4. Ambient temperature condition: 23°C
*5. This value was measured at a switching frequency of 120 operations per minute.
Catalog Here
Please call us if you have any questions at
714-871-5558
,
[email protected]
You can pick up from Fullerton, California or Piscataway, New Jersey or we will ship via UPS Ground.
Fullerton Office
2320 E Valencia Dr
Fullerton, CA 92831
Piscataway Office
244 N. Randolphville Road
Piscataway, NJ 08854
www.aceronline.net
Payment
Supra Machine Tool accepts: PayPal, Visa, Master Card, American Express, Money Orders, Cashier Checks, Wire Transfer as payment of goods purchased in our store. (Please send payment to
2320 E Valencia Dr Fullerton, CA 92831
)  All payments must be received within 7 business days.  Bidders can call 714-871-5558 or
[email protected]
for further information.  All buyers residing in California add 8.75% sales tax.
Shipping and Handling
Buyer pays the Shipping charge based on USPS Priority Mail or UPS Ground Shipping Charges.  Orders being shipped to P.O. Boxes will be delivered by United States Postal Services (USPS).  Note: Weight restrictions may apply in some cases.  (Buyers can check for shipping rates at
www.usps.com
).  Orders under 150 lbs. can be shipped by U.P.S., freight prepaid or collect.  Orders above 150 lbs. will be shipped by freight carrier.  Supra Machine Tool offers a group of carriers that can quote you with an estimate of shipping charges for all items.  Check
www.conway.com
,
www.roadway.com
.  Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed.  International buyer pays the actual shipping charge + .50-.50 handling fees.  International shipments of 150 lbs or more can be made by UPS International.  Buyers are responsible for payment of all Shipping and Handling charges on all items.
Terms and Conditions
We guarantee the items are exactly as said in description.  If you do not pay for them in the specified amount of time we have to file a non-paying complaint with eBay.  Thank you for viewing.  Supra Machine Tool appreciates your business very much.
Please visit our
Supra Machine Tool E-bay Store
for a wide selection of parts for milling machine, machining center, surface grinder, and engine lathes.
Please contact us for exact shipping cost.